UGC NET COMPUTER SCIENCE PAPER 2 SOLVED JUNE 2011

This entry was posted in CBSE NET on by
  1. Any integer composed of 3n identical digits divisible by

(A) 2n      (B) 3n

(C) 5n     (D) 7n

Answer: B

  1. The circumferences of the two concentric disks are divided into 100 sections each. For the outer disk, 100 of the sections are painted red and 100 of the sections are painted blue. For the inner disk, the sections are painted red and blue in an arbitrary manner. It is possible to align the two disks so that …………… of the sections on the inner disks have their colours matched with the corresponding section on outer disk.

(A) 100 or more            (B) 125 or more

(C) 150 or more            (D) 175 or more

Answer: A

  1. The proposition ~pÚq is equivalent to

(A) p®q             (B) q®p

(C) p«q                        (D) pÚq

Answer: A

  1. The absorption law in Boolean algebra say that

(A) X + X = X

(B) X . X = X

(C) x + x . y = x

(D) None of the above

Answer: C

  1. The number of 1’s present in the binary representation of

10 × 256 + 5 × 16 + 5 is

(A) 5                   (B) 6

(C) 7                   (D) 8

Answer: B

  1. The hexadecimal number equivalent to (1762.46)8 is

(A) 3F2.89         (B) 3F2.98

(C) 2F3.89         (D) 2F3.98

Answer: B

  1. (A + B)(AB)’ is equivalent to

(A) AÅB             (B) AʘB

(C) (AÅB)ʘA    (D) (AʘB) ÅA

Answer: A

  1. A latch is constructed using two cross-coupled

(A) AND and OR gates           (B) AND gates

(C) NAND and NOR gates     (D) NAND gates

Answer: D

  1. A multiplexer is a logic circuit that

(A) accepts one input and gives several output

(B) accepts many inputs and gives many output

(C) accepts many inputs and gives one output

(D) accepts one input and gives one output

Answer: C

  1. 8-bit 1’s complement form of –77.25 is

(A) 01001101.0100

(B) 01001101.0010

(C) 10110010.1011

(D) 10110010.1101

Answer: C

  1. From the point of view of the programmer, what are the major advantages of using a high-level language rather than internal machine code or assembly language ?

(A) Program portability            (B) Easy development

(C) Efficiency                           (D) None of the above

Answer: B

  1. What features make C++ so powerful ?

(A) Easy implementation                    (B) Reusing old code

(C) Easy memory management        (D) All of the above

Answer: D

  1. The goal of operator overloading is

(A) to help the user of a class

(B) to help the developer of a class

(C) to help define friend function

(D) None of the above

Answer: A

  1. The scheme of which interpreter translates the source program is known as

(A) Paragraph by paragraph

(B) Instruction by instruction

(C) Line by line

(D) None of the above

Answer: C

  1. Portable program means

(A) Program with wheels

(B) Independent from its authors

(C) Independent of platform

(D) None of the above

Answer: C

  1. Which of the following is the recovery management technique in DDBMS ?

(A) 2PC (Two Phase Commit)           (B) Backup

(C) Immediate update                         (D) All of the above

Answer: D

  1. Which of the following is the process by which a user’s privileges ascertained ?

(A) Authorization         (B) Authentication

(C) Access Control      (D) None of these

Answer: A

  1. The basic variants of time-stampbased method of concurrency control are

(A) Total time stamp-ordering

(B) Partial time stamp ordering

(C) Multiversion Time stamp ordering

(D) All of the above

Answer: D

  1. A transaction can include following basic database access operations :

(A) Read_item(X)         (B) Write_item(X)

(C) Both (A) and (B)    (D) None of these

Answer: C

  1. Decomposition help in eliminating some of the problems of bad design

(A) Redundancy          (B) Inconsistencies

(C) Anomalies              (D) All of the above

Answer: D

 

  1. The number of different trees with 8 nodes is

(A) 256   (B) 255

(C) 248  (D) None of these

Answer: C

  1. Given a binary tree whose inorder and preorder traversal are given by

Inorder  : EICFBGDJHK

Preorder : BCEIFDGHJK

The post order traversal of the above binary tree is

(A) IEFCGJKHDB        (B) IEFCJGKHDB

(C) IEFCGKJHDB       (D) IEFCGJKDBH

Answer: A

  1. The number of disk accesses performed by insertion operation in B-tree of height h is

(A) 0(1)              (B) 0(1gh)

(C) 0(h)              (D) None of these

Answer: C

  1. Consider a hash table of size m = 10000 and the hash function h(k) = ∟m(kA mod 1)’┘ for A = (√5–1)/2. The location to the key k = 123456 is

(A) 46     (B) 47

(C) 41     (D) 43

Answer: C

  1. When the priority queue is represented by max heap, the insertion and deletion of an element can be performed in (queue containing n elements)

(A) q(n) and q(1) respectively

(B) q(n) and q(n) respectively

(C) q(1) and q(1) respectively

(D) None of the above

Answer: C

  1. A comparison of frequency division and time division multiplexing system shows that

(A) FDM requires a lower bandwidth, but TDM has greater noise immunity.

(B) FDM has greater noise immunity and requires lower bandwidth than TDM.

(C) FDM requires channel synchronization, while TDM has greater noise immunity.

(D) FDM requires more multiplex while TDM requires band pass filter.

Answer: C

  1. If carrier modulated by a digital bit stream, has one one of the possible phase of 0, 90, 180 and 270 degrees, then modulation called

(A) BPSK          (B) QPSK

(C) QAM            (D) MSK

Answer: B

  1. Consider the following statement :

(i) The bandwidth of the A.M., wave depends on the band width of the modulating signal.

(ii) The bandwidth of the A.M., wave depends on the modulation index.

(iii) The bandwidth of the F.M, wave for all practical purpose depends on the amplitude of the carrier. Of these statements the correct statements are

(A) (i, ii)              (B) (i, iii)

(C) (ii, iii)            (D) All of the above

Answer: B

  1. A smart modem can dial, hangup and answer incoming calls automatically. Can you tell who provides the appropriate instructions to the modem for this purpose ?

(A) Communication software

(B) Error detection protocols

(C) Link access procedure (LAP)

(D) Telecommunications

Answer: A

  1. Which of the following switching techniques is most suitable for interactive traffic ?

(A) Circuit switching   (B) Message switching

(C) Packet switching   (D) All of the above

Answer: C

  1. Object modules generated by assembler that contains unresolved external references are resolved for two or more object module by a/an

(A) Operating system  (B) Loader

(C) Linker                      (D) Compiler

Answer: C

  1. A special software that is used to create a job queue is called

(A) Drive                        (B) Spooler

(C) Interpreter               (D) Linkage editor

Answer: B

  1. Which of the following permanent database that has an entry for each terminal symbol ?

(A) Literal table             (B) Identifier table

(C) Terminal table        (D) Source table

Answer: C

  1. In which way(s) a macroprocessor for assembly language can be implemented ?

(A) Independent two-pass processor

(B) Independent one-pass processor

(C) Expand macrocalls and substitute arguments

(D) All of the above

Answer: D

  1. Which of the following can be accessed by transfer vector approach of linking ?

(A) External data segments

(B) External subroutine

(C) Data located in other procedure

(D) All of the above

Answer: B

  1. Block or Buffer caches are used to

(A) improve disk performance

(B) handle interrupts

(C) increase the capacity of main memory

(D) speed up main memory Read operations

Answer: D

  1. A file organization component VSAM file is

(A) Relative records data set

(B) Keyed sequential data set

(C) Entry sequential data set

(D) All of the above

Answer: D

  1. A relationship between processes such that each has some part (critical section) which must not be executed while the critical section of another is being executed, is known as

(A) Semaphore                        (B) Mutual exclusion

(C) Multiprogramming (D) Message passing

Answer: B

  1. How many states can a process be in ?

(A) 3       (B) 4

(C) 2       (D) 5

Answer: D

  1. Which command allows you to view your file 24 lines at a time ?

(A) More                        (B) Cat

(C) Pg                (D) None of the above

Answer: A

  1. Which one of the items listed below is not one of the software engineering layers ?

(A) Process                   (B) Manufacturing

(C) Method                    (D) Tools

Answer: B

  1. What is the first stage in program development ?

(A) Specification and design

(B) System Analysis

(C) Testing

(D) None of the above

Answer: B

  1. By means of a data flow diagram, the analyst can detect

(A) Task duplication                (B) Unnecessary delays

(C) Task overlapping              (D) All of the above

Answer: D

  1. Which of these are the 5 generic software engineering framework activities ?

(A) Communication, planning, modelling, construction, deployment

(B) Communication, risk management, measurement, production, reviewing

(C) Analysis, designing, programming, Debugging, maintenance

(D) Analysis, planning, designing, programming, testing

Answer: A

  1. Many causes of the software crisis can be traced to mythology based on

(A) Management Myths          (B) Customer Myths

(C) Practitioner Myths             (D) All of the above

Answer: D

  1. Data warehousing refers to

(A) storing data offline at a separate site

(B) backing up data regularly

(C) is related to data mining

(D) uses tape as opposed to disk

Answer: C

  1. Virtual memory is

(A) related to virtual reality

(B) a form of ROM

(C) a form of RAM

(D) None of the above

Answer: C

  1. “M-Commerce” refers to

(A) a myth which does not exist in reality

(B) the ability of business to reach potential customers wherever they are

(C) the ability to have large capacity of memory storage dealing trade and commerce

(D) None of the above

Answer: D

  1. The principal electronic payment systems for electronic commerce is

(A) Credit Card                         (B) Digital Wallet

(C) Electronic Cheque                       (D) All of the above

Answer: D

  1. Which is the most valuable electronic commerce to the individual customer in long run ?

(A) Business to Customer      (B) Business to Business

(C) Customer to Customer     (D) None of the above

Answer: B

Leave a comment